Perry Easy Program Instrucciones De Instalación, Programación Y Modo De Empleo página 36

5.7 - Changing the temperature settings: Comfort, Working and Economy
If the factory-set temperatures:
t1 = 20,0 °C, t2 = 18,0 °C, t3 = 16,5 °C (for winter)
t1 = 20,0 °C, t2 = 22,0 °C, t3 = 23,5 °C (for summer)
do not happen to be suitable, they can be changed accordingly from +5 °C to +39 °C, by
pressing the relative buttons.
!
Press t1,t2 or t3 repeatedly to select the temperature setting that needs to be changed and
the indicator blinks.
G
!
Modify the selected temperature by pressing repeatedly:
(to decrease); the value changes by 0.5 °C every time the button is pressed.
B
The new temperatures selected in this way will be the new temperature settings (for all
programs).
Once you finish programming, the indicator automatically returns to the setting pertaining to
the current time after approx. 8 seconds after the last button is released.
Note: the chronothermostat will accept temperature values that satisfy the following conditions:
Winter: t1 greater than or equal to
Summer: t3 greater than or equal to
5.8 - Intelligent operation (Auto)
When in "Intelligent Mode" the chronothermostat automatically anticipates activation so
that the desired temperature is reached at a given time: anticipation (2 hours max.) adjusts
automatically according to the characteristics of the system. When the system goes on
automatically, the arrow Auto
- Keep t2 pressed for at least 4 seconds to activate "Intelligent Mode". The arrow
corresponding with Auto appears on the display to indicate its activation ( Auto).
- Keep t2 ; pressed for 4 seconds to disable this function. The arrow corresponding to
will disappear.
This function is only active in "Winter" mode.
During operation in "Summer" mode, the function is disabled and will be automatically
reactivated when next switched to "Winter" mode.
36
(to increase)
t2 greater than or equal to t3
t2 greater than or equal to t1
and ON (device enabled) will blink.
Fig. 26
Selected temperature setting indicator (blinking)
( ) Comfort temp. Setting
( ) Working temp. setting
Economy temp. setting
( )
Fig. 27 Example: Winter mode (heating)
- the chronothermostat is set to go on at h 8:00
- the comfort temperature is set at 20 °C
Auto (Disabled)
t°C
20
18
Auto
ore
8.00 8.30
Necessary time to
Reach the set
Temperature
Lower the temperature
Increase the temperature
Select the temperature setting
Auto (Enabled)
t°C
20
18
ore
7.30 8.00
The necessary time to reach
the set temperature
is automatically anticipated