Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 - Programming half-hours (½ h)
For example, P05 setting, to program:
- from h 06:00 to h 06:30 with
t3
(economy) temperature
- from h 06:30 to h 07:00 with
t1
.
1° Set temperature t3 at h 06:00:
(h 07:00) as in fig. A.
G
2° Press
to return to the previous hour setting (h 6,30)
/DAY
B
corresponding to
t1
and
t2
will blink (fig. B).
3° Press t1 to set the t1 temperature for the second half hour.
digits pertaining to
t1
and
t3
07:00) will blink (fig. C).
5.4 - Editing program P05
I
To change the previously saved settings of program
displayed (Fig. 22) and press
modified is not Monday, press
Use
t1, t2, t3
, t
to edit the daily profile, as previously described in paragraph 5.2.
Note: Use
to move to the desired hour and this will be displayed. When the key
pressed at h 23:00, the time advances to 0:00.
Press
OK
to save the daily profile, then move on to another day's profile or
button pressed for 4 seconds to save the new weekly program.
IMPORTANT: Editing the profile of one day will not affect the following day and will only
be saved for the day in question.
N.B.
: press
PROG
to exit from
P 05
34
(comfort) temperature
press
t3
until the three blinking digits are set an hour later
remain lit, whereas the three digits for the subsequent hour (h
(previously saved)
P 05
, press
OK
to access the settings (Fig. 23). If the day that is to be
OK
once or more times until the particular day is selected.
without saving.
Fig. A
Time: 06:00
, and the two digits
In line with h 06:00, the two
PROG
for
P 05
to be
Fig. 22
is
keep the OK
Blinking
Fig. 23
Fig. B
1°
Time: 06:30
3°
Fig. C
Time: 07:00
PROG
DAY
R
1
2 3 4 5 6
7
PROG
DAY
R
2°
DAY
Publicidad
Tabla de contenido
