Appearance And Key Function Of The Meter - Fora G20 Manual De Instrucciones

Appearance and Key Function of the Meter

1
2
1. LCD DISPLAY
Guides you through the test using symbols and simple messages.
2. MAIN BUTTON
Located in front of the meter with "M" on it, is used to turn on the
meter, enter the memory or control steps of setting.
3. TEST SLOT
Is where you insert the test strip. The meter will turn on automatically
after insertion.
4. STRIP-EJECTION BUTTON
Is where the used strip will be ejected after you push up the button.
5. DATA PORT
Located at the side, is for cable connection.
6. C BUTTON
Located at the side, is for control solution test.
7. SET BUTTON
Located in the battery compartment, is used to set up the meter.
3
4
5
6
SET
CR2032
BATTERY
7
11