Setting The Meter - Fora V20 Manual Del Usuario

Setting the Meter

Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
► Entering the Setting Mode.
Start with the meter off (no test strip
inserted). Press and firmly hold
seconds until the meter turns on.
Step 1
Choosing a Language.
or
Press
language for the meter is L1, which is Eng-
lish. To confirm your selection, press
Step 2
Setting the speaking volume.
There are seven (7) speaking volume op-
tions to choose from. Press
the desired speaking volume appears. To
confirm your selection, press
Volume 0 indicates that the speaking function is turned off, and "
will not display during testing. Volume 1 to 7 indicates speaking volume
from low to high, and "
to select L1/L2.The default
" will be displayed throughout the testing.
for 3
.
or until
.
"
15