Rack Installation - D-Link DES-1024D Guia De Instalacion

Rack Installation

The Switch can be mounted in an EIA standard size, 19-inch rack, which can be
placed in a wiring closet with other equipment. To install, attach the mounting
brackets on the switch's front panel (one on each side) and secure them with the
screws provided.
Then, use the screws provided with the equipment rack to mount the Switch in
the rack.
Connecting Network Cable
The Fast Ethernet Switch supports four 10/100Mbps Fast Ethernet ports. These ports
runs both half duplex and full duplex while it's running in 10Mbps or 100Mbps.
These ports are Auto-MDI type port, these ports can auto transform to MDI-II or MDI-X
type, so you can just make an easy connection that without worrying if you are using a
standard or crossover cable.
Attaching the mounting brackets to the Switch
Installing the Switch in an equipment rack
3