How To Assemble; Before You Begin Cleaning - Hoover POWERDASH Manual Del Usuario

Assembly Instructions

How to Assemble

Fully assemble or install product prior to use.
1
Insert the Upper
Handle into the Upper
Handle Pole until you
hear a "CLICK".

Before You Begin Cleaning

1. Vacuum carpet and upholstery thoroughly with a Hoover vacuum before use. Don't use
the carpet cleaner as a traditonal vacuum cleaner.
2. Use your Hoover carpet cleaner only if upholstery fabric is marked with a "W" (for "wet"
clean) or "S/W" (for "solvent/dry" or "wet" clean). Don't clean fabric marked "S" ("solvent/
dry" clean only).
3. Test for colorfastness in a small, hidden area. Gently rub surface with a dampened white
cloth. Wait ten minutes and check for color removal or bleed with a white paper towel.
2
Insert the upper
Handle Pole into the
base until you hear a
"CLICK".
Pretreating
For best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution
Guide) to help loosen and remove even the most stubborn stains.
NOTE: To avoid damage to wood floors
underneath area rugs or carpet, place
waterproof material (ex: plastic)
underneath them before cleaning.
3
Slide the Clean Water
Tank securely into
place on the back of
the unit. Push down
firmly.
NOTE: To prevent staining, use plastic
or aluminum foil to protect wood
or metal surfaces from possible
water spray.
7