Specifications; Setting Plate; Wall Plate Cover - Epson BRIGHTLINK PRO 1460U Guia De Instalacion

Specifications

Setting plate

Item
Setting plate weight
Maximum load capacity
Forward/backward slide ad-
justment range
Vertical slide adjustment range ±38 mm
Horizontal roll adjustment
range
Horizontal rotation adjustment
range
Vertical tilt adjustment range
Horizontal slide adjustment
range

Wall plate cover

The following dimensions apply when attaching the wall plate cover.
When installing the wall plate cover, you need a space of approximately 263 mm from the center of the wall
plate to the left side, and approximately 253 mm to the right side.
Specification
Approx. 7.2 kg Setting plate (2.9 kg), 3-axis adjustment
unit (1.0 kg), slide plate (0.6 kg), wall plate
(2.0 kg), wall plate cover and end cap (0.7
kg)
9.5 kg
13 to 350 mm Arm slide adjustment range: 0 to 263 mm
Adjustment for 3-axis adjustment unit in-
stallation position: 87 mm
±3° Fine adjustments possible with adjust-
ment dial
±8° Fine adjustments possible with adjust-
ment dial
±3° Fine adjustments possible with adjust-
ment dial
±45 mm
15
Remark
505.7
Installation Guide
Reference
Page
See the fig-
ure below
See the fig-
ure below
p.46
s
p.46
s
p.46
s
See the fig-
ure below
[Unit: mm]