When Two Projectors Are Installed In Parallel And You Are Using The Interactive Function - Epson BRIGHTLINK PRO 1460U Guia De Instalacion

b
Select Multi-Projection from Extended
c
Set Multi-Projection to On
Press the [Esc] button to return to the previous screen.
d
Make each setting
Color Mode
Color Uniformity
Brightness Level
Color Matching

When two projectors are installed in parallel and you are using the interactive function

When two projectors are installed in parallel and you want to use the interactive function, after adjusting the
image for multi-projection, make the following settings. Make the settings for each projector in turn. You
cannot set the two projectors at the same time.
a
Setting Projector Synchronization (
b
Setting Multi-Projection Interactive (
c
When two images overlap, the interactive function does not work correctly.
Set the same item for each projector.
Adjust the color balance for the entire screen (only when necessary).
If the brightness for each lamp is different, adjust the lamp brightness
from level 1 to 5. Adjust the darkest lamp as the standard. This is only
available when Power Consumption is set to Normal from the ECO
menu.
Adjust the color and brightness in gradations from all white to all black.
p.100)
s
p.101)
s
99
Appendix