Epson BRIGHTLINK PRO 1460U Guia De Instalacion página 69

Installation Guide
j
Use the supplied M4 x 12 mm bolts (x2) to install the securing plate on the installation plate
Tighten the bolts to the securing plate using the supplied hexagon wrench.
k
Measure the distance from the wall to the surface of the screen (f)
l
Adjust the height of the left and right according to the value (f) measured in step 11
Loosen the two screws and move the Touch Unit back and forth to adjust the left and right so that the
arrow aligns with the value on the scale the same as (f). When you have finished adjusting, tighten the
two screws.
68