Technical Features; Safety Warnings - Trix SNCB 59 Serie Manual Del Usuario

Technical Features:

• Suitable operating system:
DC power (max +/– 14 volts DC) or
DCC command control system adhering to the
NMRA standards.
• Selectrix Operation: The Central Control 2000 must be
switched over to DCC operation for this locomotive.
• Various controllable functions in DCC operation.
• Headlights change over with the direction of travel
and vary in brightness according to the voltage
present in the track, when the unit is operated with
direct current.
• Only available with DCC operation: Different
parameters can be set (address, maximum speed,
acceleration delay, braking delay).
The necessary maintenance that will comes due with
normal operation is described below. Please see your
authorized Trix dealer for repairs or spare parts.

Safety Warnings

• This locomotive is to be used only with an operating
system designed for it.
• This locomotive must never be supplied with power
from more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Trix have
been installed in Trix products or where Trix products have been
converted in such a way that the non-Trix parts or the conversion
were causal to the defects and/or damage arising. The burden
of presenting evidence and the burden of proof thereof, that
the installation of non-Trix parts or the conversion in or of Trix
products was not causal to the defects and/or damage arising,
is borne by the person and/or company responsible for the
installation and/or conversion, or by the customer.
5