Starting The Test Process - One Touch Select Manual Del Propietário

Starting the test process

Have these things ready when you test your
blood glucose level:
• OneTouch
• OneTouch
(sold separately)
• Lancing device
• Sterile lancets with protective disks
NOTE:
• Use only OneTouch
your OneTouch
• Make sure your meter and test strips are
about the same temperature before you test.
• Testing must be done within the operating
temperature range (50–111°F ). For the most
accurate results, try to test as close to room
temperature (68–77°F ) as you can.
• OneTouch
use only. Never re-use a test strip that had
either blood or control solution applied to it.
8
® ™
Select Meter
® Select ™ Test Strips
® ™
Select Test Strips with
® Select ™ Meter.
® Select ™ Test Strips are for single
CAUTION: If you
cannot test due to
a problem with your
testing supplies,
contact your health
care professional or
Customer Service.
Failure to test could
delay treatment
decisions and lead
to a serious medical
condition.
CAUTION:
The
test strip vial contains
drying agents that
are harmful if inhaled
or swallowed and
may cause skin or
eye irritation.