One Touch Select Manual Del Propietário página 16

3. Match the code on the meter with the code
on the test strip vial
If the code on the meter does not match the
code on the test strip vial, press
match the code number on the test strip vial.
The new code number will flash on the display
for three seconds, then briefly stop flashing,
after which the display will advance to the
APPLY SAMPLE
If the codes already match, press
the
APPLY SAMPLE
make a change after five seconds, the display
will advance to the
The meter is now ready to perform a blood
glucose test.
CAUTION:
test strip vial is essential to obtaining accurate results. Each time
you test, check to make sure the code numbers match.
10
screen.
screen. When you do not
APPLY SAMPLE
Matching the code on the meter and the code on the
or to
to go to
screen.