Control Solution Testing - One Touch Select Manual Del Propietário

Control solution testing

You may check your meter and test strips using either the OneTouch
™
Select
OneTouch
a known amount of glucose and are used to check that the meter and
the test strips are working properly. Remember which control solution
you used.
Do a control solution test:
to practice the test process instead of using blood,
•
once a week,
•
whenever you open a new vial of test strips,
•
if you suspect the meter or test strips are not working properly,
•
if you have had repeated unexpected blood glucose results
•
(as described on page 28), or
if you drop or damage the meter.
•
CAUTION:
it is not for human consumption.
Do Not apply control solution to the skin or eyes
as it may cause irritation.
38
®
or OneTouch Select
® Select ™ and OneTouch
Do Not swallow control solution;
™
High Control Solutions.
® Select ™ High Control Solutions contain
®