One Touch Select Manual Del Propietário página 37

After getting a result
Once you have read your result, you may:
• Review your meter memory by pressing
see page 32, or
• Turn the meter off by removing the test strip.
Removing the used lancet
Remove the lancing device cap by snapping
it off. Cover the exposed lancet tip before
removing the lancet. Place the lancet
protective disk on a hard surface. Push the
lancet tip into the disk. Remove the lancet
and place it in a container for sharp objects.
Replace the cap.
Disposing of the used lancet and test strip
It is important to discard the used lancet carefully after each use to
avoid unintended lancet stick injuries. Used test strips and lancets may
be considered biohazardous waste in your area. Be sure to follow your
local regulations for proper disposal.
to go to
MAIN MENU
,
31