Applying Blood And Reading Results - One Touch Select Manual Del Propietário

Applying blood and reading results

Once you have a blood sample and your meter shows the
screen, you are ready to obtain a blood glucose result. If your meter
does not show the
and re-start the test process. See page 8.
1. Prepare to apply the sample
Keeping your finger extended and steady, move the meter and test
strip toward the blood drop.
Fingertip
Do Not hold the meter and test strip underneath the
blood drop. This may cause blood to run into the test
port and damage the meter.
24
screen, remove the unused test strip
APPLY SAMPLE
Do Not apply blood on the top of
the test strip.
APPLY SAMPLE