Rackmounting The Ultra Enterprise 450 Server; Connecting Rackmounted Peripherals - Sun Microsystems Ultra Enterprise 450 Notas Sobre El Producto

Some of the Class A standards are noted in the "Declaration of Conformity" on page
iii of these Product Notes.
Caution – Connecting headphones to the headphone jack of the Ultra
Enterprise 450 CD-ROM drive can result in radio frequency emissions that exceed
Class B limits.
Rackmounting the Ultra Enterprise 450
Server
An optional rackmounting kit is available for installing an Ultra Enterprise 450
server into a EIA standard 19-inch rack. For additional details, contact your Sun
authorized sales representative.
Rackmount placement information for the Ultra Enterprise 450 server is available
through the Web at:
http://docs.sun.com
Click on "Storage & Peripherals" in the Hardware section and open the Rackmount
Placement Matrix.
Note – Before installing the Ultra Enterprise 450 server in a Sun Enterprise
Expansion Cabinet, be sure to remove the kick plate at the bottom rear of the
cabinet. Removing the kick plate allows two Ultra Enterprise 450 servers to fit inside
the cabinet. For additional details, see the documentation supplied with the Sun
Enterprise Expansion Cabinet.

Connecting Rackmounted Peripherals

When connecting a deskside Ultra Enterprise 450 server to any rackmounted
peripheral, be sure to connect an appropriate grounding strap between the server
and the rack enclosure. This strap prevents ground loops between the two systems
and guards against possible data loss.
Ultra Enterprise 450 Server Product Notes 1-9