Unpacking And Setting Up; Basic Operation; Preparing Food - Silvercrest SKMM 1000 A1 Instrucciones De Servicio

Working tool
Mini crusher Crushing, chopping
(16 + 17) small amounts of onion,
herbs, nuts, coffee
beans
Do not use any liq-
uids!

6. Unpacking and setting up

NOTE: when the device is used the first few times, some
odour may be generated by the device due to the heating
of the motor. This is harmless. Please ensure adequate ven-
tilation.
1. Remove all packing materials.
2. Check to ensure that all parts are present and undam-
aged.
3. Clean the device prior to first use! (see "Clean-
ing and servicing the device" on page 73).
4. Figure A: unwind the power cable 11 only as far
from the cable spool 23 as necessary.
5. Place the base unit 14 on a level, dry, non-slip and
waterproof surface so that the device can neither fall
over nor slip off.
Select a smooth surface so that the suction feet 12
are able to attach themselves.
DANGER! Risk of injury!
Do not insert the mains plug 11 into a wall socket until
the food processor has been completely assembled for
the intended purpose.
66
GB
Function Quantity
max. 150 g
Do not fill
above the
MAX mark
Position Process-
of the dial ing time
P, 1, 2 max.
2 min.

7. Basic operation

7.1 Preparing food

WARNING! Risk of material damage!
Do not use the device to chop particularly hard food
such as bones or nutmegs.
• Wash and clean vegetables, fruit and herbs.
• Remove stems (e.g. from herbs), hard peels (e.g. from
nuts) and parts which you do not wish to process (e.g.
apple seeds).
• Use fresh herbs in a dry condition.
• Remove sinews, bones and gristle from the meat.
• Remove the cheese rind.
• Process cheese and meat only if they are well cooled.
• Soft cheese (e.g. mozzarella) can also be briefly fro-
zen.
• For processing with the blade assembly 9 and in the
mini crusher 16 + 17, cut the food into small pieces of
a similar size.
• For processing with discs 6, 5 cut the food up until it is
so small that it fits into the central food chute (midi
food pusher 2 removed). Food with a long shape
(such as carrots, cucumbers, courgettes) can be pro-
cessed whole. These are placed upright into the food
chute. They should fill the width of the food chute as
much as possible so that they are unable to fall over.
• For processing with the French fries disc 7 the potatoes
must fit into the large food chute so that they will not
protrude beyond the MAX mark on the food chute of
the lid 4. If necessary, cut the potatoes into suitable
pieces.
• For processing with the citrus press 19 + 21 select
ripe citrus fruits. These have more juice. Cut the citrus
fruits across the segments in half.
Note
• The sealing ring 15 must
be inserted.