Initial Start-Up - Silvercrest SKM 500 B2 Instrucciones De Uso

WARNING! RISK OF INJURY!
Caution: the cutting knife, the cutting, shredding and grating
►
discs and the mixing knife are extremely sharp! For this reason,
take care when cleaning.
Caution: the cutting knife, the cutting, shredding and grating
►
discs and the mixing knife are extremely sharp! For this reason,
take care when emptying the mixing bowl and the blender.
When the appliance is operating, do not put anything other
►
than the ingredients to be processed into the mixing bowl or
the blender.
Do not put hands and foreign objects in the to filling shaft or the
►
mixer to avoid the risk of injury or damage to the appliance.
Do not change accessories unless the drive is stationary and
►
the mixer is unplugged from the power supply! The appliance
will run on for a short time after being switched off!
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in
►
motion during operation, the appliance must be switched off
and disconnected from mains power.
CAUTION - PROPERTY DAMAGE!
Never fill the blender with boiling fluids, such as soup! Allow
►
these to cool until lukewarm.

Initial start-up

■ Clean the appliance as described in the chapter "Cleaning and Care".
■ Place the appliance on a flat and clean surface.
■ Attach the appliance to the subsurface with the suction cups so that it is fixed.
■ Unwind the power cord from the cord storage
cable lead through.
■ Assemble the appliance as described in the chapter entitled "Assembly"
depending on the type of use.
■ 110 │ GB │ MT
and then attach it to the
SKM 500 B2