Conceptronic CMED2PRO Guia Del Usuario página 31

ENGLISH
There is no sound
x The Audio cable is not connected properly. Make sure the cable is connected correctly to your TV or
amplifier.
x The CMED2PRO is connected with an amplifier, but the amplifier is turned off. Turn on the
amplifier.
x The audio stream of the MPEG2 or VOB file is invalid. Press the AUDIO button on the remote control
to adjust to the proper audio stream.
x The Mute function is on. Press the MUTE button on the remote control again to cancel mute.
x The CMED2PRO is functioning in FF/FR mode. Press the PLAY/PAUSE button on the remote control
to return to normal playback.
The display is distorted
x The CMED2PRO is functioning in FF/FR mode. Press the PLAY/PAUSE button on the remote control
to return to normal playback.
x A PAL movie is played at NTSC mode or vice versa. Press the P/N button on the remote to change
the display settings.
When pressing the SLIDE button, the system freezes.
x There are too many photos or music in the current folder. It will take a long time to start Music-
Slide-Show. Please wait for playback.
The Remote control doesn't work
x Point the remote control to the CMED2PRO receiver in about ±30 degrees and directly.
x Use the remote control in the range of 5 meters.
x The remote control battery should be replaced.
The subtitles of the played movie are not displayed
x An AVI file is played, but the subtitle file contains a different filename. See chapter 5.3 how to
display the subtitles.
When trying to play video, the message "CODEC NOT SUPPORTED" is displayed.
x The movie file is created with a not-supported codec for the CMED2PRO.
Refer to the website, www.conceptronic.net for a list of supported codecs for the CMED2PRO.
The CMED2PRO does not display all HDD partitions / content.
x The partition on the HDD is not primary. Re-partition the HDD again and make sure all partitions are
set to primary.
x The partition is not FAT32 formatted. Re-format the partition with FAT32 Filesystem.
x There are no mediafiles on the selected partition.
Which Memory Cards are supported by the CMED2PRO?
x The CMED2PRO reads all major Memory Card families, like:
Memorystick (MS), Secure Digital (SD), Multimedia Card (MMC), Compact Flash (CF), Microdrive (MD).
Refer to the website, www.conceptronic.net for a list of supported Memory Cards for the
CMED2PRO.
The DVD playback does not start when the Play/Pause button is pressed.
x
Make sure you use the correct folder structure. The folder structure is described in chapter 5.3.
x
The DVD Files are incomplete, corrupt or damaged. When this happens, the CMED2PRO does not
start DVD playback.
During the intro-movies of the DVD, the screen goes blank.
x
The current chapter ends with a blank screen or is too short to playback. Press
to the next chapter.
My TV shows a black/white picture instead of colour.
x
Your TV cannot handle the "Multi" TV-System of the CMED2PRO. Use the Setup menu to change the
TV System to PAL. (See chapter 6).
After changing the TV System, turn off and on the CMED2PRO.
31
/ NEXT to switch