Publicidad
Step 10
Slide the SUPPORT ROD (DD) through the RIGHT UPRIGHT (C).
å
Turn the TURNBUCKLE (FF) several turns onto the LONG SUPPORT
å
ROD (EE). Turn the SUPPORT ROD (DD) into the other end of the
TURNBUCKLE several turns.
NOTE: If the TURNBUCKLE will not turn onto the threads, use the other
å
end of the TURNBUCKLE. Turn the TURNBUCKLE onto the RODS until
the holes in the SUPPORT ROD (DD) line up with the holes in the TOP (E).
Now, fasten the SUPPORT ROD (DD) to the TOP (E). Use two SILVER
å
9/16" PAN HEAD SCREWS (VV).
Hand tighten the TURNBUCKLE until it is snug. Now, use your screwdriver
å
to tighten the TURNBUCKLE another 1/4 turn.
NOTE: Tighten the TURNBUCKLE more if the TOP ever begins to sag.
å
SILVER 9/16" PAN HEAD SCREW
(2 used in this step)
www.sauder.com/services
VV
FF
Drawers on both sides of the desk
C
E
DD
EE
404972
Page 15
Publicidad
