Publicidad
Step
Step 34
Insert the SLIDE CAMS (MM) into the large holes in the
å
LARGE DRAWER SIDES (D447 and D88).
Fasten the LONG EXTENSION SLIDES (Y) to the LARGE
å
DRAWER SIDES (D447 and D88). Use four GOLD 5/16"
FLAT HEAD SCREWS (XX) through holes #1 and #4.
NOTE: The screw head in the CAM must be visible through
å
the slotted hole in the SLIDE.
Repeat this step for the other drawers. The small drawers
å
will use the EXTENSION SLIDES (BB) and holes #1 and #3.
3
4
www.sauder.com/services
Open end
1
2
Y
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
MM
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D88
D447
XX
404972
MM
1
2
Y
3
4
Open end
Page 39
Publicidad
