Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (GG) into the large holes in the ENDS (A and B).
Repeat this step for the UPRIGHTS (C and D), TOP (E), and
both BOTTOMS (F).
NOTE: Do not push any TWIST-LOCK® FASTENERS into
å
the holes in the MODESTY PANEL (G) at this time.
(26 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
GG
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
404972
www.sauder.com/services
Publicidad
