Towing Hitch; Coupling Triangle; Storage - Kärcher MIC 34C Manual Del Usario

8.10.1 Towing hitch

 The permissible drawbar and drawing loads of the ma-
chine are indicated in the Chapter "Technical Specifica-
tions".
8.11 Towing hitch
1
1 Safety pin
2 Towing hitch
 Unlock the safety bolt by turning it and pull it out toward
the side.
 Slide the lorry hitch into the square pipes of the ma-
chine frame.
 Slide in the safety bolt and lock it by turning it.
 The permissible drawbar and drawing loads of the ma-
chine are indicated in the Chapter "Technical Specifica-
tions".

8.12 Coupling triangle

The coupling triangle enables the attachment of upgrade
kits already available at the municipalities.
9

Storage

WARNING
Risk of injury and damage! Note the weight of the appli-
ance in case of storage.
If the vehicle is not used for a longer period of time, ob-
serve the following points:
 Park the vehicle at a safe, level and dry place.
 Turn ignition key to "STOP" and remove it.
 Secure vehicle against rolling away, lock parking brake.
 Change the engine oil and the oil filter.
 If frost is expected, check whether there is enough anti-
frosting agent in the cooling water.
 Charge battery approx. every 2 months.
 Disconnect the negative terminal of the battery if the
appliances is not used for more than 4 weeks.
50
1
2
1 Implement frame
2 Safety pin
3 Coupling triangle
8.12.1 Securing the coupling triangle
 Attach the coupling triangle to the front power lift and
secure it by means of safety bolts.
8.12.2 Prerequisites for operation
– Depending on the weight of the mounted attachment,
counterbalance weights (option) must be attached to
the back of the appliance.
– Establish hydraulic connections depending on the at-
tachment.
Refer to the operating instructions of the attachment.
8.12.3 Operations
 To raise and lower, operate the front power lifter with
the joystick.
18
-
EN