Citizen CH-452 Manual De Instrucciones página 16

MEASURING YOUR BLOOD PRESSURE
[Manual pressurization]
• If your systolic blood pressure is expected to exceed
200 mmHg, use Manual Pressurization when taking
a measurement.
• Keep "START/STOP" switch held pressed until
the pressure value you want to stop pressurization
is reached (approximately 40 mmHg higher
than the Systolic blood pressure). You can stop
pressurization by the unit by releasing the switch at
the aforementioned value is reached.
The upper pressure limit is 280 mmHg
AUTOMATIC POWER OFF FEATURE
• After taking the blood pressure measurement, pressing the "START/STOP" switch
will turn the monitor off. However, if you do not press the switch, the monitor's
Auto OFF function will automatically turn the monitor off after 3 minutes.
- -
Eng 16