Citizen CH-452 Manual De Instrucciones página 19

CALLING UP THE DATA STORED IN MEMORY
• Press the "MEMORY" switch again. This
recalls and displays the second last set of
data stored. Each time you press this switch,
the unit displays the data prior to the last set
of data displayed.
• The value stored in memory is numbered in
the order of measurements. For example,
when 90 sets of data are stored in memory,
the data number 1 represents the latest data.
Data number: 1, 2, 3, ...
* You can fast-forward the data numbers
in display by pressing and holding the
"MEMORY" switch.
- -
Eng 19
... 89, 90

The latest The earliest
data data
