Installing Or Replacing The Ribbon Cartridge - Epson LQ-300+ Manual Del Usario

2.
Hold one of the paper supports and push the tips into the notches on the edge guide.
3.
Repeat step 2 for the other paper support.

Installing or replacing the ribbon cartridge

Before installing the ribbon cartridge, make sure that the printer is not plugged into an
electrical outlet.
Follow these steps to install or replace the ribbon cartridge:
1.
Open the printer cover to the upright position, then pull it up to remove it.
w
Warning:
Never move the print head while the printer is turned on; this can
damage the printer. Also, if you have just used the printer, let the print
head cool for a few minutes before you touch it.
8