Using The Power Switch Cover; Installing The Ribbon Cassette - Epson TM-H5000II Manual Del Usuario

English
ERROR LED
Lights to indicate an error.
RELEASE LED
Lights to indicate that you can insert slip paper.
SLIP LED
Lights to indicate that the printer is in slip mode.
Removing the Dampers
The printer is protected for shipping by
two transportation dampers that you
must remove before you turn on the
printer.
Open the printer by pulling the tab on
the front cover, and remove the two
dampers shown in illustration
Note:
Reinstall the dampers before shipping.

Using the Power Switch Cover

WARNING:
If an accident occurs with the power switch
cover attached, unplug the power cord
immediately. Continued use may cause
fire.
The enclosed power switch cover keeps
the power switch from being pressed
accidentally. To use the cover, install it
as shown in illustration

Installing the Ribbon Cassette

Use the EPSON ERC-31 ribbon cassette. The use of any ribbon
cassettes other than those approved by EPSON may damage the
printer and will void the warranty.
6 TM-H5000II User's Manual
.
1
.
2
1
2