Safety Labels; Important - Shindaiwa T242 Manual Del Usuario

Ocultar thumbs Ver también para T242:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Be Aware of the Working Environment
Avoid long-term
operation in very hot or
very cold weather.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
Figure 2

Safety Labels

Safety and Operation Information Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing information labels. New labels are
available from your local authorized Shindaiwa dealer.
Figure 3
4
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Be constantly alert for objects and
debris that could be thrown either
from the rotating cutting attachment
or bounced from a hard surface.

IMPORTANT

This label indicates the minimum
distance between front handle
and rear grip per ANSI B175.3.
T242
Make sure bystanders or
observers outside the 50-
foot "danger zone" wear eye
protection.
50
FEET
When operating in rocky terrain
or near electric wires or fences,
use extreme caution to avoid
contacting such items with the
cutting attachment.
Always make sure
the appropriate cutting
attachment shield is
correctly installed.
If contact is made with a
hard object, stop the engine
and inspect the cutting
attachment for damage.
T242X

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

T242x

Tabla de contenido