Safety Labels - Shindaiwa T272 El Manual Del Propietario

Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Be extremely careful of
slippery terrain, especially
during rainy weather.
If contact is made with a
hard object, stop the engine
and inspect the cutting
attachment for damage.
Be constantly alert for objects and debris that
could be thrown either from the rotating cutting
attachment or bounced from a hard surface.
Figure 2

Safety Labels

Figure 3
4
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
When operating in rocky terrain or near electric wires
or fences, use extreme caution to avoid contacting such
items with the cutting attachment.
This label indicates the minimum
distance between front handle and
rear grip per ANSI B175.3.
50
FEET
Beware of a coasting blade when brushcutting
or edging. A coasting blade can injure while
it continues to spin after the throttle trigger is
released or after the engine is stopped.
IMPORTANT!
Safety and Operation Information
Labels: Make sure all informa-
tion labels are undamaged and
readable. Immediately replace
T272
damaged or missing information
labels. New labels are avail-
able from your local authorized
POSITION HANDLE
FORWARD OF THIS LINE
Shindaiwa dealer.
T272X
Make sure bystanders
or observers outside the
50-foot "danger zone"
wear eye protection.