Safety Labels - Shindaiwa 270 Serie Manual Del Propietário

Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
Be extremely careful
of slippery terrain,
especially during
rainy weather.
If contact is made
with a hard object,
stop the engine and
inspect the cutting
attachment for
damage.
When operating in rocky terrain or near
electric wires or fences, use extreme caution
to avoid contacting such items with the cutting
attachment.
Be constantly alert for objects and debris that could be thrown either from
the rotating cutting attachment or bounced from a hard surface.
Figure 2

Safety Labels

IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
Figure 3
4
weather.
Make sure bystanders or observers outside
the 50-foot "danger zone" wear eye
protection.
50 fEET
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Always make sure the
appropriate cutting
attachment shield is
correctly installed.
Beware of a coasting blade
when brushcutting or edging. A
coasting blade can injure while
it continues to spin after the
throttle trigger is released or
after the engine is stopped.
This label indicates the minimum
distance between front handle and rear
grip per ANSI B175.3.
T270
Reduce the risk of
C270