WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
Wand Button
Bouton du tube
Botón del tubo
Cord Holder
Porte-cordon
Sujetador
del cordón
Up and In
Vers le haut et à l'intérieur
H
Slot
Fente
Ranura
ASSEMBLY INSTRUCTIONS
Power Nozzle
Raised Area
Portion en relief
Área elevada
acia arriba y hacia dentro
Slot
Fente
Ranura
Wands
➢ ➢ Slide wands together until wand
button snaps into place.
➢ ➢ Insert wands into POWER NOZZLE
until the wand button snaps into
place.
➢ ➢ Connect POWER NOZZLE plug and
cord as shown.
➢ ➢ Do not force.
➢ ➢ Raised area of plug must face
toward hand.
➢ ➢ If hard to install, turn the plug over
and try again.
To Remove:
➢ ➢ Disconnect POWER NOZZLE plug
and cord.
➢ ➢ Steady Power Nozzle with foot and
turn wands until the button
disappears, then pull wands out of
Power Nozzle.
➢ ➢ Pull wands out of POWER NOZZLE.
- 14 -