Cleaning The Badu Block Multi Acrylic Lid; Draining/Cleaning; Disassembling Of The Pump/Unit - Speck Normblock Multi Serie Traducción De Las Instrucciones Para El Manejo Originales

Pos: 178 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/Multi/Acryldeckel der BADU Block Multi reinigen @ 4\mod_1449582541172_370.docx @ 55562 @ 3 @ 1
8.2.2

Cleaning the BADU Block Multi acrylic lid

NOTICE
Damage to the acrylic glass surface may cause stress cracks in
the lid.
 Do not use aggressive or corrosive cleaning agents or
solvents.
 Do not use sharp tools e.g. knives scrapers, steel wool or
sponges with a rough side.
 Clean the acrylic glass lid with lukewarm water, household
washing up liquid and a soft cloth.
Pos: 179 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/Multi/Entleeren/Reinigen Multi @ 4\mod_1449582570417_370.docx @ 55578 @ 2 @ 1
8.3

Draining/Cleaning

• Normblock Multi: Loosen the drain plug (903) on the pump
housing and drain and dispose of the pumped liquid properly.
• BADU Block Multi: Loosen the drain plug (903.3) on the
pre-filter housing and drain and dispose of the pumped liquid
properly.
Clean or rinse the pump/unit with clear water.
Pos: 180 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/Multi/Demontage der Pumpe/Anlage Multi @ 4\mod_1449582607118_370.docx @ 55594 @ 2 @ 1
8.4

Disassembling of the pump/unit

DANGER
Danger of injury due to insufficient safeguarding.
 Turn the pump/unit off correctly.
Close shut-off valves and additional connections.

 Drain the pump.
NOTICE
Dissembling various components from the shaft can be difficult
following longer operation times.
Either use suitable extractor devices or commercial rust

disolvers.
Pos: 182 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/Multi/Vorbereitung Multi @ 4\mod_1449582652373_370.docx @ 55610 @ 3 @ 1
04/2016
Maintenance
EN 41