Shutting Down; Pump/Unit Remains Assembled; Pump/Unit Is Dissembled And Stored - Speck Normblock Multi Serie Traducción De Las Instrucciones Para El Manejo Originales

Start-up/shut down
Pos: 149 /Technische Dokumentation/Betriebsanleitung/Inbetriebnahme/Multi/Außerbetriebnahme Multi @ 4\mod_1449581969868_370.docx @ 55304 @ 2 @ 1
6.2

Shutting down

For pre-requisites for shutting down the pump "Switching the

pump off" on page 31.
NOTICE
For idle periods exceeding one year, elastomer components must
be renewed.
Pos: 150 /Technische Dokumentation/Betriebsanleitung/Inbetriebnahme/Multi/Pumpe/Anlage bleibt eingebaut Multi @ 4\mod_1449582013964_370.docx @ 55320 @ 3 @ 1
6.2.1

Pump/unit remains assembled

 Switch the pump/unit on regularly – monthly to quarterly –
during long idle periods. Switch the pump back off again after
approx. 5 minutes.
This will avoid deposits forming in the pump/unit and piping
system.
NOTICE
The pump/unit can be damaged if it runs dry!
 Ensure that the pump/unit is always full of water.
Pos: 151 /Technische Dokumentation/Betriebsanleitung/Inbetriebnahme/Multi/Pumpe/Anlage wird abgebaut und gelagert Multi @ 4\mod_1449582043673_370.docx @ 55336 @ 3 @ 1
6.2.2

Pump/unit is dissembled and stored

 Drain pump/unit. See chapter 8.3 on page 41.
 Clean and dry pump/unit.
 Store pump/unit. See chapter 4.3 on page 22.
Pos: 152 /Technische Dokumentation/Allgemeine Module/#### Seitenumbruch #### @ 0\mod_1426069111812_0.docx @ 891 @ @ 1
32 EN 04/2016