Festo CPV GE-DN3-8 Serie Instrucciones Para El Usuario página 17

1 User
The CPV valve terminal with field bus direct connection
(CPV Direct) is exclusively intended for use as a slave on the
DeviceNet field bus in the industrial area.
The maximum values specified in the section Technical
specifications" must be observed here. Detailed informa
tion can be found in the manual P.BE−CP−DN3−...
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Only use power sources which guarantee reliable
electrical isolation of the operating voltage according
to IEC/DIN EN 60204−1. Also observe the general
requirements for PELV power circuits according to
IEC/DIN EN 60204−1.
S Connect an earth conductor of sufficient diameter to
the connection marked with the earth symbol.
Festo CPV...−GE−DN3−8 0709NH English
instructionsEnglish
17