Setting The Temperature; Changing The Temperature Display (Remote Control Only); Setting The Fan Speed - Aerian AAC9K Manual Del Usuario

Control panel
The cooling system will switch off if the ambient temperature is lower than the set temperature. As the
ambient temperature rises above the set temperature the cooling function will re‐start.
Setting the temperature
Repeatedly press
the temperature.
Press and hold
only modes, you cannot set the temperature.
The display will show the temperature you set in the cool mode.
Adjustable temperature range:
30°C max.
16°C min.
Changing the temperature display (remote control only)
When the appliance is turned off, press
temperature display from Celsius to Fahrenheit and vice versa.
Setting the fan speed
Repeatedly press
speed.
The speed indicator light will illuminate to indicate which speed setting is in use.
/ on the control panel
/ on the remote control for fast setting. In the dehumidification and fan
on the control panel or
Remote display
or
/
and at the same time to change the
on the remote control to select the fan
EN-12
on the remote control to set