Cleaning the filters
Remove the filters.
• The filters should be cleaned regularly. Use a vacuum cleaner
or tap the filters lightly to remove loose dust and dirt from the
filters and then rinse thoroughly under running water. Dry
thoroughly before replacing.
NOTE: Never use the air conditioner without the filters.
Storage
• Drain any water in the appliance before completely operating the appliance on fan only mode for a few
hours, to thoroughly dry the inside.
• Clean the filters.
• Fix the supplied power cord wraps to the rear of the appliance using the supplied screws. Coil the power
cord to the wraps.
• To store the remote control, remove the batteries from the remote control and then put it in the remote
control compartment on the top of the appliance.
• Place the appliance in a dry place.
EN-19