Setting The Timer - Aerian AAC9K Manual Del Usuario

On the control panel
NOTE:
If the appliance is in dehumidification mode, you cannot select the fan speed.
Setting the timer
Programming the timer for ON – when the appliance is OFF.
1. Press on the control panel or
The indicator light
remote display will flash.
2. While the indicator light or indicator is flashing on the display, repeatedly press
control panel or
Press and hold
On the control panel display, the time will be changed in half an hour increments up to 10 hours,
and then in 1 hour increments up to 24 hours.
On the remote display, the time will be changed in half an hour increments up to 24 hours.
3. Once set press
The indicator light
will countdown.
4. When the set time has been reached, the appliance will turn on automatically.
Programming the timer for OFF – when the appliance is operating.
1. Press on the control panel or
The indicator light
remote control display will flash.
on the control panel display and/or the arrow pointing to
/ on the remote control to change the time.
/ on the remote control for fast setting.
on the control panel or
and/or the arrow pointing to
on the control panel and/or the arrow pointing to
On the remote display
on the remote control.
on the remote control to confirm.
will stop flashing. The time setting
on the remote control.
EN-13
on the
/ on the
on the