General Safety Precautions; Operating Instruction; Entrance/Exit Door Frame Ditec Alu48 - entrematic Ditec ALU48STD Manual De Instalación Y Montaje

This symbol indicates instructions or notes regarding safety, to which special attention must be paid.
i
This symbol indicates useful information for the correct functioning of the product.

1. General safety precautions

This installation manual is intended for qualified personnel only.
Read the instructions carefully before installing the product.
Bad installation could be dangerous.
Before installing the product, make sure it is in perfect condition.
Use original spare parts only for repairs or replacements of products.
These instruction must be kept and forwarded to all possible future users of the system.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of children, as these are a potential source of danger.
The ALU48 door frame system complies with the essential requirements of the following standards:
Drawings of all standard typologies are available in graphic format for CAD environments (dwg or dxf) and image format (pdf) at http://www.ditecentrematic.com/download.
2. Operating instructions
In the sections below, the used formulas take into account the following standard criteria:
- for every type of door, the reference dimension of the automation is indicated (LT).
3. Entrance/exit door frame – Ditec ALU48 Series
- 48 mm size
– suitable for DITEC automated installations, with special devices that guarantee accident prevention
- surface finish with powder coating (polyester powder in RAL colours- Qualicoat) or anodising (EURAS finishes - Qualanod).
also allows maintenance to be carried out easily if glasses are accidentally damaged or broken.
The door frame is equipped with special EPDM gaskets for the hermetic central stop with brush-type seals in the openable horizontal and vertical perimeters which give the system optimal
temperature and sound proofing performances.
The door frames are designed in a wide range of coded typologies to allow customers to select a solution that suits the type of installation according to the specifications in the Technical Manuals.
The ALU48 series consists of profiles (uprights and crosspieces) with sturdy visible sections which can be used to create all the typologies Standard with Overlight.
Profiles are designed to house locks with European cylinder for moving wing closure (night-time closure), available with an additional floor lock too.
4 4