Start - Maruyama MS0735W Manual Del Propietario U Operador

Start

Start of engine
CAUTION
・When starting the engine, make sure to put
water or chemicals into the chemical tank.
Without water or chemicals in the tank, the
pump will break down. Never run the pump dry.
・It is confirmed that the ball cock has closed
before it starts.
1
Perform priming.Push priming pump installed
in front of the carburetor several times slowly,
and confirm that fuel fills the priming pump
and returns to the tank through the clear
return line.
2
Fully close the choke. (In hot weather or
when engine is hot, the choke should be
partly open or fully open.)
3
Move throttle lever to medium-and low-
speed position.
Throttle lever
4
Set handle of pressure control valve at
"STARTING" position.
12
Close
H
L
STARTING
English