Start - Maruyama MS073D Manual De Funcionamieno Para Usuarios Y Propietario

Start

Start of engine
CAUTION
When starting the engine, make sure to put
water or chemicals into the chemical tank.
Without water or chemicals in the tank, the
pump will break down.
It is confirmed that the ball cock has closed
before it starts.
1
Perform priming.Push priming pump installed
in front of the carburetor (rear in the specifi-
cation with cell starter) several times slowly,
and confirm that fuel fills the priming pump
and returns to the tank.
English
All manuals and user guides at all-guides.com
7
2
Fully close the choke. (In hot weather or
when engine is hot, the choke should be
partly open or fully open.)
Close
3
Move throttle lever to medium-and low-
speed position.
4
Set handle of pressure control valve at
"Start" position.
Start