Using The Memory Function - Omron Gentle Temp 521 Manual De Instrucciones

MC-521-E_A_M_main.book Page 11 Tuesday, March 26, 2013 2:41 PM
3. Using the Unit
3.2

Using the Memory Function

This unit automatically stores the results up to 25 sets after each measurement.
Note: If the memory is full, the unit will delete the oldest reading.
1.
Press the ON/MEM button to turn on the unit.
2.
Press the ON/MEM button again.
The memory number appears on the display.
3.
Release the ON/MEM button.
The most recent result will appear on the display.
Press the ON/MEM button repeatedly to view the older results.
4.
Press and hold the ON/MEM button until "OFF" appears on the display to
turn off the unit.
It will automatically turn off after 1 minute.
EN
11