Omron Gentle Temp 521 Manual De Instrucciones página 15

MC-521-E_A_M_main.book Page 14 Tuesday, March 26, 2013 2:41 PM
4. Troubleshooting and Maintenance
Error Display
Surface mode:
Temperature taken is lower than -22.1°C (-7.8°F).
Device can not be powered on to the ready stage.
4.2
Maintenance
• Please check the device if damaged after it is dropped. If unsure, please contact the OMRON retail outlet or
distributor for having the device checked.
• The probe is the most delicate part of the unit. Use care when cleaning the Infrared sensor to avoid damage.
• Do not store the unit in the following types of places. Doing so may damage the unit.
- Wet locations.
- Locations with high heat and humidity or those that are exposed to direct sunlight. Areas close to heating
equipment, dusty locations, or environments where there are high salt concentrations in the air.
- Locations where the unit will be subjected to leaning over, falling, shock or vibration.
- Pharmaceutical storage areas or locations where corrosive gases are present.
14
Cause
Check the integrity of the probe cover and take a
new temperature measurement.
Change to a new battery.
(Refer to section 4.3)
Remedy