Troubleshooting And Maintenance; The Icons And Error Messages - Omron Gentle Temp 521 Manual De Instrucciones

MC-521-E_A_M_main.book Page 12 Tuesday, March 26, 2013 2:41 PM

4. Troubleshooting and Maintenance

4.1

The Icons and Error Messages

Error Display
Device stabilization in process.
Prove cover is not attached correctly.
Battery is low.
Measurement before device stabilization.
The device is showing a rapid ambient
temperature change.
12
Cause
Wait until
Attach the probe cover again until
flashing.
Replace the battery.
(Refer to section 4.3)
Wait until
Allow the thermometer to rest in a room for at least
30 minutes at room temperature: 10°C and 40°C
(50°F - 104°F).
Remedy
stops flashing.
stops
stops flashing.