tau K996M Guía Para La Instalación página 18

MANUFACTURER'S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
Address:
Declares under its sole responsibility, that the product:
designed for automatic movement of:
for use in a:
complete with:
Model:
Type:
Serial number:
Commercial name:
Has been produced for incorporation on an access point (overhead door) of for assembly with other devices
used to move such an access point, to constitute a machine in accordance with the Machinery Directive
2006/42/EC.
Also declares that this product complies with the essential safety requirements of the following EEC direc-
tives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 2014/53/EU Radio equipment and telecommunications terminal equipment
Also declares that it is not permitted to start up the machine until the machine in which it is incorporated or
of which it will be a component has been identified with the relative declaration of conformity with the provi-
sions of Directive 2006/42/EC.
The following standards and technical specifications are applied:
EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; ETSI EN 301 489-3 V1.6.1;
EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all infor-
mation pertinent to the quasi-machinery.
Sandrigo, 31/10/2017
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
TAU S.r.l.
Via E. Fermi, 43 - 36066 Sandrigo (Vi) - ITALY
Electronic control unit
Overhead Doors
Residential / Communities
Radioreceiver
K996M
K996M
see silver label
Control panel for one-two 12V motors for over-
head doors
Legal Representative
_________________________________________
Loris Virgilio Danieli
18