Publicidad
Step 25
Step
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOOR may need some adjustments. Follow the text below
å
to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
To adjust the DOOR up and down (vertical), loosen both vertical
å
adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting
å
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
Page 30
Adjusting screw (horizontal)
416969
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/services
Publicidad
