Publicidad
Step 28
Step
1
D14
S
Groove
Insert the FILE DRAWER SIDES (D14 and D15) at
å
an angle into the slot at each end of the FILE
DRAWER FRONT (S).
3
Fasten the FILE DRAWER BACK (D78) to the FILE DRAWER SIDES (D14
å
and D15). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the FILE DRAWER BOTTOM (D716) inserts into the groove
å
of the FILE DRAWER BACK (D78).
Repeat this step for the remaining drawers using the SMALL DRAWER
å
FRONTS (T), DRAWER SIDES (D107 and D108), DRAWER BACKS (D109),
and DRAWER BOTTOMS (D707).
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D15
D78
D14
D716
VIEW THE T-LOCK BOX VIDEO
2
D14
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the FILE DRAWER BOTTOM (D716) into the grooves
å
in the FILE DRAWER SIDES (D14 and D15) and FILE
DRAWER FRONT (S).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D15
416969
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D716
D15
S
30S
(12 used in this step)
Page 33
Publicidad
