Sauder 416969 Manual De Instrucciones página 31

Step 26 Step
Fasten the KEYBOARD UPRIGHTS (G) to the TOPS (H
å
and I). Tighten four TWIST-LOCK® FASTENERS.
NOTE: The surfaces with TWIST-LOCK® FASTENERS
å
on the UPRIGHTS should face each other.
www.sauder.com/services
H
G
Dowel end
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Roller end
G
® FASTENER
416969
I
Page 31