the answer/end key for about
2 seconds, or switch off the headset.
To switch the call back to the headset,
press and hold the answer/end key for
about 2 seconds, or switch on the
headset.
Turn lights on or off
By default, the indicator lights are
on in all situations. To turn the lights
off in some situations (for example,
during a call or when the headset is
connected to a device) or back on,
press and hold the power key and the
answer/end key for about 2 seconds
when the headset is connected to
a device.
Battery and charger information
This device has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
Clear settings or reset
To delete the pairings from the
headset when it is switched off,
press and hold the power key and the
answer/end key (for about 5 seconds)
until the red and green indicator lights
start to alternate.
To reset the headset if it stops
functioning, even though it is charged,
connect the headset to a charger
while you press and hold the
power key.
Troubleshooting
If you cannot connect the headset to
your compatible device, check that
the headset is charged, switched on,
and paired with your device.
from the device, as you may damage the
device. This device is intended for use
when supplied with power from the
ENGLISH