Starting the Engine
1. Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing
it each time (Figure 12).
Note: If the air temperature is below 55°F (13°C),
firmly push the primer in 5 times.
2. Hold the blade control bar against the handle and
pull the recoil start handle (Figure 13).
Note: When you pull the recoil start handle, keep
your fingers away from the cable on the handle.
Figure 12
1. Blade control bar
3. If the mower does not start in 1 or 2 pulls, press the
primer button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.
9
Figure 13