Temporis_06.qxd
l
l
l
4.
l
l
l
5.
l
32
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
22/11/02
09:07
Mute function
During a conversation, if you don't want your correspondent to hear you,
press the
key and hold it down as long as necessary.
Ringing light
When there is an incoming call, the light on the top of the handset comes
on.
Accessing your Operator's services (keys R, *, #).
Check with your local branch.
SETTING THE TEMPORIS 06 PARAMETERS
Tone/Pulse dialling
By default, your telephone uses voice frequency (VF) tone dialling. If
this is not suitable, you can switch to pulse dialling by setting the cursor
on the side of the handset to DC.
Pause (
).
This function is only used behind a PBX.
Flash time
The cursor on the upper side of the handset can be used to modify the
flash time (values: 100, 300 or 600 ms).
Position the cursor on the chosen value.
Then confirm the change by hanging up the handset on the base before
making a new call.
WHAT TO DO IF ...
There is no tone
"
Check that the line cord is correctly connected to the wall jack.
"
Check that the cradle on the handset is not blocked.
Page 32